Half-Moon Lead Block on 1-1/4" T-Track Slider

For Boats up to 38 Feet

Stainless Steel

This rigged, offshore design provides a low winch lead while spreading sheet loads over several track fasteners for maximum strength. The screw pin is located in the center of the slide to prevent snagging and accidental release.
Designed to articulate up to 45 degrees to either side of the track, half-moon lead blocks are often used to provide a proper lead angle to foot or turning blocks near the cockpit. Stainless, bolted construction provides a brilliant finish and allows complete disassembly for inspection or maintenance.

• Aluminum sheave with "Torlon" ball bearings
• Stainless steel springs support block
• Center screw pin locks slide in place
• Track Size - 1-1/4" x 3/16" (32 x 5mm)
• Boat LOA - 38 Ft (11.5m)
• Boat Displacement - 18,000 Lbs (8,182kg)
• Sail Area - 715 square feet (66 square meters)
• Sheave Diameter - 3-1/4" (83mm)
• Maximum Line Size - 3/4" (19mm)
• Dimensions (L x W x H) - 5-1/2" x 1-5/8" x 5-7/32" (140 x 41 x 133mm)
• Bearing Height - 2-3/32" (54mm)
• Safe Working Load - 5,000 Lbs (2,270kg)
• Weight - 2 lbs. 2 oz. (964g)