My shopping cart
Your cart is currently empty.
Continue ShoppingRONSTAN Series 30 Orbit Single Block with Stand Up Swivel
Lightweight and strong blocks for modern rigging systems.
The 30mm single block with stand up swivel is a true workhorse and is suitable for use in most dinghy control line systems. Great for mainsheets, and control line turning blocks mounted low in the cockpit.
Ronstan’s goal for the Orbit Blocks™ was to produce a block with the highest strength to weight ratio—and they nailed it. Through extensive computer modeling, unnecessary metal components were replaced by engineered light-weight composites without compromising strength. The unique glass fiber reinforced nylon cheeks and head design can be secured using the supplied loop or converted to a soft attachment using a Dyneema® link to further reduce weight. The hollow-bearing at the center of a single sheave serves as a becket to further reduce weight while adding versatility.
The performance was not lost with the weight savings. In fact, the Orbit Blocks™ have the highest working loads in their class and feature an improved two-stage bearing system that efficiently handles static and dynamic forces throughout the load range. High compression grade acetal orbital ball bearings migrate to the loaded area of the sheave to handle light to moderate loads; larger loads are shouldered by the full-contact PTFE impregnated nylon bearing with carbon fiber reinforcement. Conventional and high-tech lines run smoothly over the UV resistant acetal sheave
Sailors can have the best of both worlds with Ronstan Orbit Blocks™. These lightweight and compact blocks are smooth, efficient even under larger loads, and are an ideal solution for modern control line systems on dinghies up to larger yachts.
Sheave Diameter | Line Compatibility | Shackle Pin Diameter (if applicable) |
---|---|---|
20mm | 1/4" (6mm) | 1/8" |
30mm | 5/16" (8mm) | 5/32" |
40mm | 5/16" (9mm) | 5/32" |
50mm | 3/8" (10mm) | 3/16" |
55mm | 3/8" (10mm) | 3/16" |
70mm | 1/2" (12mm) | Only available with Dyneema® link |
Name | Value |
---|---|
Becket | No Becket |
Diameter | 5/16 Inch or 8 mm |
Direction | Any |
Integral Cleat | No Integral Cleat |
Mount Type | Mechanical Fasteners |
Ratchet | Non Ratcheting |
Safe Working Load | 661 Pounds |
Sheave Diameter | 1 3/16 Inches or 30 mm |
Type | Single Pivoting |
Weight | 1.2 Ounces |
© 2023 SailM8 | Powered by Shopify