29mm Wire Upright Lead Bullet Block
This Harken 108 Rope/Wire Upright Lead Block is often used to lead spinnaker pole lift, cunningham, outhaul and other control lines from the mast base.
Designed for vangs, outhauls or shrouds where wire is used or for rope where loads are too high for regular bullet blocks. Roller bearings handle high loads better than ball bearings. Sheaves are PTFE-impregnated, Hardkote anodized aluminum for strength. They deliver dependable fast trim and release under high or low loads.
A range of styles lets these blocks adapt to almost all control line applications. Ideal for cunninghams, vangs, outhauls, traveler controls, spinnaker controls, barberhaulers, etc.
Key Features
- Fixed, stand-up wire or rope lead block for a 90 degree turn
- Used on many types of control systems
- Corrosion-resistant stainless steel straps reinforce these blocks
- Ball bearings, sheave and sideplates are UV stabilized
- Sheave Diameter: 1 1/8" (29 mm)
- Max. Line Diameter: 5/16" (8 mm)
- Max. Working Load (MWL): 500 lb. (227 kg)
- Breaking Load: 2000 lb. (907 kg)
- Weight: 1.5 oz. (43 g)
- Length: 1 1/2" (38 mm)
- Fasteners: Four #10 RH (5 mm)
29mm Wire Upright Lead Bullet Block
Ball Bearings |
Delrin |
Becket |
No Becket |
Diameter |
5/16 Inch |
Direction |
Any |
Integral Cleat |
No Integral Cleat |
Length |
1 1/2 Inches |
Mount Type |
Mechanical Fasteners |
Ratchet |
Non Ratcheting |
Safe Working Load |
500 Pounds |
Sheave Diameter |
29 mm |
Type |
Single Upright |
Weight |
1.5 Ounces |