A Hinged Mast Step simplifies raising the Mast on smaller boats. Most assemblies shown here are 'Universal', designed to be bolted to standard Mast Steps, usually Cast Aluminum, allowing the Mast to pivot on one of the horizontal Pins. Assemblies are short enough that it is usually not necessary to modify existing rigging to add them to your boat. The size of your Mast Section will determine which units are suitable for your boat. If you require a new Mast Step, hundreds are listed on-site under the specific Mast Section that they fit.

Stainless Steel Halyard Organizer Plate

Features:

• Rugged stainless steel construction
• 1/2" diameter holes on the angled plate edges for attaching halyard lead blocks
• Mounts under mast step
   

Style A

 has four corners drilled in mounting surface. Model DH2870 (Style A) works with the DH2151 Hinge.

Style

 A

No. of Holes for Block Attachment

 4

W1

 3.75"

W2

 5.25"

L

 4"

H1

 1.8"

H2

 2.7"

Hinged plates Mfg# DH2150 and Mfg# DH2151 are available and sold separately.

Stainless Steel Halyard Organizer Plate

Features:

• Rugged stainless steel construction
• 1/2" diameter holes on the angled plate edges for attaching halyard lead blocks
• Mounts under mast step
   

Style B

 models have mounting hole patterns that vary. These plates can be custom-drilled to suit mast.

Style

 B

No. of Holes for Block Attachment

 8

W1

 3.5"

W2

 5.1"

L

 5.6"

H1

 N/A

H2

 N/A

Hinged plates Mfg# DH2150 and Mfg# DH2151 are available and sold separately.