Harken Code Zero Furling Snap Shackle Adapter 3112

Code Zero furlers are used with free-flying asymmetrical headsails and staysails with apparent wind angles of 40° to 60°. Suitable for boats up to 125 feet, they tame Code Zero sails, screechers, Gennakers, and staysails. It is suggested to keep the furler all the way in or all the way out.

Special Order Only

*Order these components for extra sails. Note: Each extra sail has a head swivel and fixed tack terminal. See note regarding Reflex cable.
** See diagrams below regarding use of Reflex torsion cable to improve furling.

Using the Reflex torsion cable with a code zero sail: The Reflex torsion cable is designed for furling an asymmetric spinnaker and transmits torque at lower halyard/luff loads than other types of torque cables. The Reflex torsion cable improves furling when used with a code zero type sail. IMPORTANT! Unit 1 and 2: Always make sure there is a tension handling line as shown below. Unit 3 exception: The unit 3 Reflex torsion cable has a high strength, low stretch Dyneema® core to handle code zero halyard/ luff loads.

• Check recommended boat and sail size.
• Note: If you also plan to use the system for code zero sails, the loads
  will be higher so max boat and sail size will be smaller. If using for multihulls downsize maximums by 10%.